Spreadrum phones are among the very popular phones around us. Their chips are used on both feature and smartphones. When these devices become faulty software wise, the need arises to fix them using the manufacturer’s tool.
How To Flash .Pac File To Spreadtrum Devices
To successfully flash .Pac files to ‘Spreadtrum‘ phones like Itel, Mhorse, Innjoo, BML, etc, please follow the instructions below.
REQUIREMENTS- A windows PC
- Spreadtrum Device e.g Itel
- Spreadtrum driver (download from post)
- A good USB cable
- Flash file in .Pac format.
- Spreadtrum Upgrade tool [Research / Upgrade Download]
How To Flash Spreadtrum .Pac File To Spd Devices
- Download and Install Spreadtrum USB Driver on your Computer. If you have already installed Spreadtrum Drivers on your computer, then SKIP this Step.
- Download .pac firmware for your device
- Download and extract Upgrade / Research Download Tool to any location on your computer. After extracting, open the ‘Research / Upgrade download folder and open the file; Research Download.exe
- The program will then launch. Click on the Settings Icon [Load Packet] at the top left.
- In the next menu, locate and select the .pac file you wish to flash.
- After the .pac file has been loaded completely, click on the Play Icon to start the flashing.
- Now turn off or remove and reinsert the battery of your Spreadtrum phone. While pressing ‘Volume UP or DOWN button or even both, connect the USB cable to the PC to begin flashing.
- The process will begin and all of the partitions will be flashed one after another until you will get a Pass notification.
- Your phone may automatically restart or you can manually do it.
If research or upgrade download is showing waiting instead of flashing, click here to troubleshoot the problem.
]]>
thanks mister, please help me to share it again on my page
Sharing And Learning
thank you for the assistance.what firmware can i use to flash ocean model t4 .i have been trying to flash using sp flash tool together with the rom syou have provided but non of these firmwares hav e worked correctly as by powering it on only blur values have been appearing.please help