This is the stock factory signed firmware for the Tecno Pop 2 Plus BA2.
In this post, you will find the download link for the Tecno Pop 2 Plus BA2 factory firmware/flashfile to fix several software related issues on the Tecno Pop 2 Plus BA2.
Why do you need the factory firmware for the Tecno Pop 2 Plus BA2?
With the factory firmware, you can comfortably fix several software related issues on the Tecno Pop 2 Plus BA2 device.
With a factory firmware/flash file, you can:
- Fix dead boot on devices due to wrong firmware flashed initially
- Fix/Repair IMEI on your device using the DB files in the factory firmware
- Remove Monkey Virus/other malware
- Fix hang on logo, rebooting or restarting
- Restore devices to their factory state
- Completely un-root your device
- Fix unfortunately, app has stopped
- Fix network related issues
- FRP Reset
- LCD Display issues
and other software related issues.
What do you need to do before flashing the factory firmware?
- Before flashing this factory file, although it’s tested 100% and confirmed, you should check your device’s model/build number if it matches the file you are downloading.
- You should make a backup of your device, if you can or just proceed withy the firmware flashing.
- Use the latest version of the required software, whether SP Flashtool or any recommended Smartphone Servicing Tool.
Download Links –
- TECNO BA2-H8027ABC-OGo-190929V321
- Tecno BA2-H8027ABC-OGo-200225V388
- TECNO BA2-H8027ABC-OGo-200424V409
- TECNO BA2-H8027ABC-OGo-200529V416
Flashtool – Use NCK Box or AfterSales SWD, CM2 etc
You can use the official IMEI Repair Tool(AfterSales IMEI Tool) to fix IMEI on these devices.