Below you can find the latest and official stock firmware for the OnePlus 5T.The OnePlus 5T firmware shared on this page can be useful in fixing diverse software related issues like ;
- Hanging on OnePlus Logo
- Bootloop
- Unfortunately apps have stop working
- Upgrading of your current firmware build
- Revert to official stock ROM
- Unroot your device
- Fix other software related issues that requires reinstalling the stock firmware.
Below is the download link for the OnePlus 5T stock firmware.
OnePlus5TOxygen_43_OTA_048_all_1904191530_f1dedf62ffb14bff.zip
V9.0.5
Size: 1.71GB
How To Flash Stock ROM (.zip File) To OnePlus Device
After downloading the compatible firmware for your One+ device, here are the required steps to install the firmware.
- Download the software build for your OnePlus device at the top of this page.
- Plug your phone into your computer and copy the downloaded .zip file to your phone’s storage or SD card. If you’re using a Mac, you can install Android File Transfer for this operation.
- After the .zip file is copied to your phone, reboot your phone into recovery mode. To do this, shut down your device and turn it back on while holding the power and volume down buttons simultaneously.
- Choose “Install from local / Install from SD“, find your .zip file and click on “Install” to confirm.
- Wait a while, your phone should now update to the selected build and reboot automatically to take you into OxygenOS.
Alternatively, on newer models like the OnePlus 3, OnePlus 5, OnePlus 3T, you can also use the guide below.
- Download the software build for your device at the bottom of this page. Make sure you have all necessary adb files installed on your computer.
- Reboot your phone into recovery mode. To do this, shut down your device and turn it back on while holding the power and volume down buttons simultaneously.
- Choose “Install from USB” option in the recovery screen, tap OK to confirm. A screen with “You are in sideload mode” will be displayed. If you are not using the original Oxygen Recovery. Follow the guide here if you are using TWRP recovery.
- Connect your device to PC/Mac, run following command in command prompt / terminal For Windows: “adb sideload ” For Mac/Linux: “./adb sideload ”
- Wait a while, your phone should now update to the selected build and reboot automatically to take you into OxygenOS.
If you have any issue, don’t hesitate to drop a comment.
Leave a Reply