iFindHub

iFindHub is a blog that focuses on the best of Android and iOS apps and tips, tech how to guides, and some cool lifestyle contents.

Home » Download MTK Secure Boot DA(Download Agent) Loader Files For MTK Devices

Download MTK Secure Boot DA(Download Agent) Loader Files For MTK Devices

By 82 Comments

If you are reading this post, you might have faced FRP related issues on a Mediatek device even with professional tools like CM2, NCK, Miracle Box, etc.

Most new Mediatek powered smartphones come with a secured boot/boot ROM that can’t be controlled with the normal MTK DA(Download Agent) which is always in the official SP flash tool and other Chinese smartphones fixing tools.

Google Domains has features you can’t resist. Check it here

How To Repair/Write IMEI on Old and Latest Secure Boot/Non Secure Boot MTK Devices

With the normal MTK_AllInOne_DA.bin file, you can perform operations on like FRP reset, firmware backup, flashing, read security codes etc on MTK devices.

But this isn’t possible on devices with a secured boot device. Trying this will give you errors all through unless you find a way of getting through it directly on the phone. Most CM2 users would have seen this error :

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable

This shows that the device can’t be communicated with the normal DA file since it has a secured boot.

The simple solution is to use a custom secured DA file for the device and it can then accept any command from the tool/DA.

Some other devices might also need an AUTH(Authentication file) to get things done in severe cases.

In this post, you will find secured boot DA files for popular MTK devices like

  • Tecno
  • Infinix
  • Itel
  • Huawei
  • Doogee
  • Wiko
  • Oppo
  • Qmobile
  • Asus
  • Acer
  • Etc

Using this file with Smartphone servicing tools like CM2 and NCK box will enable you to remove FRP on the affected device easily and safely.

Since these devices may also have signed firmwares and secured boot, you should be very careful not to play around with its firmware or perform unnecessary operations. Although these files have been tested on devices with FRP with success, using it is solely your responsibility.

If you have Infinity CM2 or NCK box, you can use the secure DA files and get FRP or any other operation done easily.

Download MTK Secure Boot DA Loader Files For MTK Devices

Below is a list of secure MTK DA files for MTK devices with secure boot.

You might also like to download:

iOS 12.3.1 IPSW files for your iPhone, iPad, iPod Touch

ZTE Stock ROMs Firmware Flash files

Alcatel Android Stock ROMs Firmware Flash files

Alcatel MTK Secure Boot DA(Download Agent) Loader Files

Acer MTK Secure Boot DA(Download Agent) Loader Files

Infinix MTK Secure Boot DA(Download Agent) Loader Files

Archos MTK Secure Boot DA(Download Agent) Loader Files

Itel MTK Secure Boot DA(Download Agent) Loader Files

Asus MTK Secure Boot DA(Download Agent) Loader Files

Blackview MTK Secure Boot DA(Download Agent) Loader Files

LeEco-LEtv MTK Secure Boot DA(Download Agent) Loader Files

Tecno MTK Secure Boot DA(Download Agent) Loader Files

True MTK Secure Boot DA(Download Agent) Loader Files

Doogee MTK Secure Boot DA(Download Agent) Loader Files

Huawei MTK Secure Boot DA(Download Agent) Loader Files

Oppo MTK Secure Boot DA(Download Agent) Loader Files

QMobile MTK Secure Boot DA(Download Agent) Loader Files

Wiko MTK Secure Boot DA(Download Agent) Loader Files

Intex MTK Secure Boot DA(Download Agent) Loader Files

Leeco MTK Secure Boot DA(Download Agent) Loader Files

Lava MTK Secure Boot DA(Download Agent) Loader Files

Lenovo MTK Secure Boot DA(Download Agent) Loader Files

Mobiwire MTK Secure Boot DA(Download Agent) Loader Files

Micromax MTK Secure Boot DA(Download Agent) Loader Files

HTC MTK Secure Boot DA(Download Agent) Loader Files

Motorola MTK Secure Boot DA(Download Agent) Loader Files

Nokia DA Files

Symphony MTK Secure Boot DA(Download Agent) Loader Files

Oukitel MTK Secure Boot DA(Download Agent) Loader Files

Fero MTK Secure Boot DA(Download Agent) Loader Files

Yuphoria MTK Secure Boot DA(Download Agent) Loader Files

  • YUS5O011

ZTE MTK Secure Boot DA(Download Agent) Loader Files

Panasonic MTK Secure Boot DA(Download Agent) Loader Files

Note:

More DA files will be added. 

How To Use A Custom MTK DA File With CM2 MTK Module

If you have Infinity Chinese Miracle 2 dongle/CM2 activated software, you can use these files if you follow the steps below.

  • After downloading the file, make sure you rename it to MTK_AllInOne_DA_SP
  • Go to your CM2MTK boot folder on your PC. It’s at C:\InfinityBox\CM2MTK\BootHow To Use A Custom MTK DA File With CM2 nck
  • Copy/move the MTK_AllInOne_DA_SP.bin to your desktop
  • Copy the custom DA file into the MTK boot folder.
  • Make sure it’s renamed properly MTK_AllInOne_DA_SP
  • Once done, open CM2 MTK Module
  • Select the MT65xx as usual
  • Click on Service Tab
  • Click FULL FACTORY(WIPE + FRP) and select FRP(Factory Reset Protection)
  • Once done, click on Reset Settings / Format FSMTK secure boot da file
  • If everything went well, the FRP partition will be wiped safely.

If you use the latest CM2 MTK V2 software, it’s now as easy as NCK MTK software. All you have to do,

  • Open the software
  • Under custom settings (DA Auth Cert), select DA and select the custom DA file you have or previously downloaded.
  • Click on the Service Tab
  • You can now proceed to reset ONLY FRP and it will work flawlessly.

Download InfinityBox_CM2MT2_v2.00-r2.7z

How To Use A Custom MTK DA File With MTK SP Flashtool

How To Use A Custom MTK DA File With MTK SP Flashtool

  • Download the latest version of SP Flashtool v5.1744 – Download
  • Unpack the archived file and paste it on your desktop
  • Open the SP Flashtool v5.1744 folder and launch flash_tool.exe
  • Once open, click on Choose in front of Download-Agent, locate and select the custom MTK_AllInOne_DA_SP for your phone.
  • If there’s an Auth file too, you should add it via the Authentication file tab.
  • You will then need to load the scatter file of your device.
  • Then follow Method 3 on FRP Bypass
  • You should be very careful to avoid issues.

How To Use A Custom MTK DA File With NCK Box

To use a custom DA file on NCK box MTK module, it is very easy. NCK MTK Module has an easy to use interface. You must have the box to use the software unless you are using a cracked version.

So let’s quickly see how to use custom DA file with NCK box

  • Launch NCKBox Android MTK software
  • Click on FRP-Pattern-Privacy tab
  • Click on the Select custom loader
  • Locate and select the custom DA file for your device.
  • You can now reset FRP or perform other operations with the custom DA file.
  • It’s so simple.

If you have any questions or contribution, you can use the comments box below.

A big thanks to CM2 Team, Hovatek and NCK Box team Go get one of these tools if you really want to step up your phone fixing game.

Reader Interactions

Comments

  3. Solf Klaus Peter says

    oppof9 Bootloop need I think SP flash tool

    First i get Sec Auth file needed error 0x C0030012

    If there’s an Auth file too, you should add it via the Authentication file tab. Than I get error 5001 Auth. file invalid false format !
    I try scatter firmware from CPH1823_11_A.12_190101 Scatter Firmware BY EasyfirmwareS.com other not fond !

    You will then need to load the scatter file of your device.
    Then follow Method 3 on FRP Bypass Site not open cant explane no knowledge what is Methode 3 !
    You should be very careful to avoid issues
    You will then need to load the scatter file of your device.
    Then follow Method 3 on FRP Bypass
    You should be very careful to avoid issues

    what can i do ?

    Reply

  8. JEANPY KAZADI says

    Hello Bro, please help me with tecno camon 16 ce7j DA FILE
    I’m very in need, thanks in advance for your great service

    Reply

  12. BenBuchi says

    Please, am seriously in need of Texno KE5 go 2020 DA and AUTH files.
    I’ll be very glad if you can help me with them.
    Thanks.

    Reply

  13. Patrick says

    I have a Techno CAM CA6 am trying to load the firmware but there is an error S_AUTH_SEND_FAIL (6029). how can i fix that kind of error?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *